Introduction
L-CNG plunger pump pry is a core equipment used in L-CNG refueling stations. Its operating principle is based on the reciprocating motion of the plunger pump to achieve the suction, pressurization, and discharge of liquefied natural gas (LNG), ultimately lifting LNG to a high pressure state (usually 20-25MPa) for subsequent vaporization into compressed natural gas (CNG)
Specifications
| 1. Form | horizontal, piston type, fixed speed |
| 2. Column count | Double column |
| 3. Design temperature | -196 ° C |
| 4. Medium used | LNG (liquefied natural gas) |
| 5. Maximum inlet pressure | 1.6MPa |
| 6. Minimum inlet pressure | 0.02MPa |
| 7. Maximum working pressure | 25MPa |
| 8. Design pressure | 27.5Mpa |
| 9. Flow rate | 1500L/h liquid) |
| 10. Piston diameter | 41mm |
| 11. Piston stroke | 56mm |
| 12. Working hours | Can run intermittently or continuously for 24 hours |
| 13. Dimensions (length x width x height) | (4000 * 2250 * 2540) mm |
Advantages and selling points
- Durable and sturdy, worry free and cost-effective
Its core component (plunger pump) is like a sturdy and durable "iron lump", particularly adept at withstanding high-pressure work for long periods of time.
Selling points: Not easy to break, requires minimal maintenance, and can be used continuously for many years. Help you save a lot of money on maintenance and equipment replacement costs, and almost never delay business due to pump problems.
- Strong and stable, fast and sufficient gas filling
It provides high and stable pressure, and sufficient flow.
Selling point: When refueling your CNG vehicle, the speed is fast, the filling is full, and the driver doesn't have to wait for long. The vehicle has sufficient power, runs far, and the driver is satisfied. Your standing monument is good, and there will be more repeat customers.
- Small footprint, ready to use once installed
The entire system (pumps, valves, control boxes) is pre installed on a sturdy metal base (pry block).
Selling point: After being transported to the site, it can be used by connecting a few pipelines and wires. The installation is particularly fast, and the station can be put into operation in a few days, helping you open early and earn money, while also saving space on the site.
Hot Tags: l-CNG plunger pump skid, China l-CNG plunger pump skid manufacturers, suppliers, factory, Containerized LNG Cryogenic Pump Skid, Dual Pump LNG Cryogenic Pump Skid, L CNG Plunger Pump Skid, lng cryogenic pump skid, Simple LNG Cryogenic Pump Skid, Single Pump LNG Cryogenic Pump Skid
